Holmatro SR 20 PC 2 Gas/petrol Duo Pump

Page 1 of 3REPAIR & MAINTENANCE I Spider range pumps IMaintenance instructions:After use (every time)• To be used for all Spider range pumps.• Wear full protective gear during maintenance !• Always act according to the safety instructions as supplied with each pump !Necessary equipment: soft cloth (also check list page 7).Step 1• Check general condition of the pump.• In case of electrical engine: check connection wire for damage. Replace if the insulation is damaged.• Storage: Place the pump in a horizontal position.Step 2• Check coupler(s) and dust cap(s) for dirt and/or oil leakage.• Clean coupler(s) with a clean and soft cloth, if necessary with water and soap.• If necessary grease with WD40 or hydraulic oil.• Check function coupler(s), see page 14.• Reconnect loose dust cap(s) to coupler(s).Step 3• Traditional couplers only: check if the lock ring on the outside of the swivel is still firmly attached.• Replace when broken, corroded, bend or missing.Step 4• Check the rubber connection tube between the tank and flange. Replace if damaged or when leaking.• Check if the clamps are still fastened.Holmatro Rescue Equipment B.V. I P.O. Box 33 I 4940 AA Raamsdonksveer, the Netherlands I T +31 (0)162 589200 I [email protected] I www.holmatro.com© Holmatro 08-12 While the greatest care has been devoted to the content, it is possible that the information in this printed matter is incorrect or incomplete. N.V. Holmatro and its affiliated companies (hereafter: Holmatro)cannot be held liable in any way for the consequences of activities undertaken on the basis of this printed matter. If you have any doubts about the correctness or completeness of the information, youshall contact Holmatro. Nothing from this printed matter can be copied and/or made public in any way without he explicit authorization of Holmatro.