Senseca MW3-020HM Level Switch

Level SwitchDimensionsLevel Switch MW3MW3-HM Spansil● ● ● ●High switching current Highly reproducible Transformer Plug connectionMW3-HK stainless steelCharacteristics Mechanical level monitor for fluid media, with contact-free triggeringof a micro switch.optionally Ball PVDFTechnical data Switch Process connection Density of medium Pressure resistanceMedium temperature Ambient temperature Media Wiringmicro switch male thread G ¾ A; G 1 A Spansil float Stainless steel floatSpansil float Stainless steel float -20..+110 °CHandling and operation0.7 g/cm3 0.9 g/cm3PN 25barPN 10 bar-20..+70 °C water, oils (aggressive media available on request) transformerNo. 0.444● When tightening the union nut, the connection piece must be countered using an open-ended spanner (SW 19).● It must be ensured that the values given for voltage, current, and power are not exceeded.● When switched on, a load must be connected in series.● The electrical details apply to ohmic loads. Capacitive and inductive loads must be operated using a protective circuit.● Not suitable for use in media with ferritic particles.● Switch position is fixed at factory.Ordering code 1.MW3 -1 Switching voltage Switching current Protection class Ingress protectionElectrical connection Materials medium-contactNon-mediumcontact materials Wight ocation23123max. 250 V AC max. 5 A 2 - safety insulationIP 65 plug DIN 43650-A / ISO 4400 Brass construction:Stainless steel CW614N nickelled, construction:1.4301, 1.4571, 1.4305, 1.4571, Spansil (NBR), hard Hard ferrite, FKM ferrite, NBRABS, PA, NBR2.3.H1. Connection size 020 threaded connection G ¾ A 025 threaded connection G 1 A2. Process connection H screw-in thread3. Connection material M brass K stainless steelOptions ● Connection for round plug connector M12x1, 4-pole - 250 V AC, 4 A● Float ball PV DF ● Float cylinder stainless steel ● Signal lamp red or red/green with plug DIN 43650-A● Gold contact 125 V AC / 30 V DC, 100 mA0.35 kg horizontal installationdsh_fam_mw3_en_vs01 V1.01-001