Senseca H2Z1-025GK060 Flow Indicator

Flow indicator H1Z1 / H2Z1Ranges Details in the table correspond to horizontal inwards flow with increasing flow rate.Standard type H1Z1 Qmax.Display range recommended l/min H2O 0.1 - 1.2 6 0.5 - 6.0 10 1.0 - 12.0 202.0 - 23.0 30 3.0 - 34.0 40 4.0 - 45.0 60 6.0 - 65.0 80 20.0 - 85.0 100 Special ranges are available.● No electrical supply required ● Individually calibrated display ● Compact designCharacteristics A piston fitted with a magnet is pushed through the medium againstthe force of a spring. This activates the pointer of the measuring device by means of a magnetic coupling. Because of the hermeticseparation from the medium, the display unit cannot be soiled by the medium.Technical data Switch Nominal width Process connection Display range Pressure lossQmax.Tolerance Pressure resistance Media temperature Ambient temperature MediaElectrical data Materials medium-contactNon-mediumcontact materials Weight Installation locationwithoutDN 8..25 female thread G 1/4..G 1 (further process connections available onrequest) 0.1..85 l/min for details see 0.4..3.5 bar at Qmax.table "Ranges" to 100 l/min ±5 % of full scale valuePN 200 bar optionally PN 500 bar -20..+120 °C -20..+70 °CPressure loss bar at Qmax. H2O 0.4 0.5 0.6 0.4 0.8 1.4 1.6Viscosity compensated type H2Z1 Viscosity Display Pressure loss Qmax.stability range recommenbar at Qmax.oil mm²/s ±8 %, min.l/min oil ded 30..330 30 60 100 205 330 mm²/s 0.5 - 10 12 1.1 1.4 1.6 2.8 3.5 ±0.3 l/min1.5 - 20 22 2.2 2.3 2.4 ±0.5 l/min 2.5 - 30 35 1.9 2.0 2.1 2.3 2.9 ±0.8 l/min6.0 - 45 60 2.6 ±2.7 l/min 12.0 - 65 80 2.1 2.3 2.4 2.6 2.8 ±3.0 l/min Special ranges are available.Dimensions and weightsBrassStainless steelGTypesSWXG 1 /4 G 3 /8 G 1 /2 G 3 /4 G1 G 1 /4 G 3 /8 G 1 /2 G 3 /4 G1H.Z1-008GM H.Z1-010GM H.Z1-015GM H.Z1-020GM H.Z1-025GM H.Z1-008GK H.Z1-010GKH.Z1-015GK H.Z1-020GK H.Z1-025GK401518 4115Weight kg 1.31.2 1.1 1.3 1.218 1.1water, oil (gases and aggressive media available on request) none Brass construction:Stainless steel CW614N nickelled, construction: 1.4571, CW614N, 1.4310, 1.4404, 1.4310, hardhard ferrite, NBR ferrite PTFE-coated, FKM PC, acrylic see table "Dimensions and weights"Standard: horizontal inwards flow from the left; other installation positions are possible;the installation position affects the display range.pi-ho_fki-h1z1_e V1.80-031