Senseca GOX 100 Oxymeter

OxymeterH59.0.21.6C-11page 8 of 814 Specification Measuring range:0.0 ... 100.0 %O2 (oxygen concentration)Accuracy:calibrated device at nominal temp.: ± 0.1 %O2 ± 1 digit Sensor linearity: < 2 vol.-% +/- 0.1%; < 25 vol.-% +/- 0.5%;< 100 Vol.-% +/- 1.0%Sensor connection 0.7m connection cable (fixed to device) with jack connectorelectrochemical partial oxygen pressure sensor, integrated in sensor housing (type for replacement: GOEL 370)Response time:90% in < 10 sec., depending on temperature Operating life:guaranteed 12 months (assuming appropriate usage at air pressure) Operating pressure: 0.5 to 2.0 bar absolute. (at one-sided strain: max. 0.25 barover-/under-pressure)Sensor:Meas. Frequency:about 1 measuring per secondDisplay:approx. 13 mm high, 3½-digit LCDPushbuttons:3 keys for ON/OFF, min-/max-value display, calibrationMin-/Max- Memory: min and max measured value are stored Nominal temp.:25°CAmbient temp.:0 to 45°C (sensor), -20 to 50°C (device)Relative humidity:0 to 95 %RH (not condensing)Storage temperature:-15 to 60°C (sensor), -20 to 70°C (device)Power Supply:9V-battery type JEC 6F22 (in scope of supply)Power Consumption:0.14mA (standard zinc carbon battery: >2100 hours!)Battery Change Indicator: automatically if battery is used up: "BAT" Auto-Power-Off:when activated, the device switches automatically off, if it is not operated for longer time (selectable 1..120min).Housing:impact-resistant ABS, transparent panel, front side IP65Dimensions:approx. 106 x 67 x 30 mm (L x W x D) without sensor cableWeight:approx. 185g incl. battery and sensorEMC:The device corresponds to the essential protection ratings established in the Regulations of the Council for theApproximation of Legislation for the member countries regarding electromagnetic compatibility (2004/108/EG).Device meets EN 61326-1:2006, Additional fault: <1%