Senseca FF-015RMS-125 Flow Switch

Flow SwitchFlow Switch FF-015RMS-125/-138Weight Installation locationsee table "Dimensions and weights" Standard: horizontal inwards flow; switchinghead not recommended underneath; other installation positions are possible; theinstallation position affects the switching point and range.Adjustment Details in the table correspond to horizontal inwards flow withdecreasing flow rate.UNSSwitching point l/min H2O 1“-14 UNS DN 15 6 1“-14 UNS DN 15 10 Special ranges are available● Adjusted switching value ● Highly reproducible ● Insensitive to dirtDNTypesQmax.recommendedFF-015RMS-138 FF-015RMS-12520 20Dimensions and weights UNSCharacteristicsTypes1“-14 UNS FF-015RMS...HLSWX79772911Weight kg 0,668The volume flow raises a piston (fitted with a magnet) out from a valve seat against a spring force. The piston actuates ahermetically separated reed switch.Technical data Switch Process connection Adjustment Qmax.Tolerance Pressure resistance Medium temperature Ambient temperature MediaWiringreed switch male thread 1“-14UNS for details see table "Adjustment" ±3 % of the switching value,minimum ±0.3 l/minPN 200 bar -20..+100 °C -20..+70 °C water (oils available on request) normally open (n.o.)no. 0.212brown Switching voltage Switching current Switching capacity Protection classIngress protection Electrical connection Materials medium-contact Non-mediumcontact materialsbluemax. 230 V AC max. 1 A max. 50 VA 1 - PE connectionIP 65 silicon cable 0,95 m CW614N, CR 70, CuSn 8, hard ferrite PA, PVC, Siliconpi-ho_fkv-ff-rms_e V1.02-011