AST SRX-MT22-L2 Electrochemical Sensor

APPLIED SENSING TECHNOLOGIESPPM Oxygen Sensor Model: SRX-MTL-2CAST Model SRX-MTL-2C Trace PPM O2 sensor is a drop-in replacement to Teledyne Model C6689-L-2C oxygen sensor. This sensor has a largerelectrolyte reservoir and hence offer a much longer sensor life comparedto the standard PPM O2 sensor. This sensor is ideal for very dry gas streams and gas streams at temperature above 30 degree Celsius. Sensoris designed, developed and manufactured in the USA.Model SRX-MTL-2C Replaces: Teledyne L-2C Part # C06689-L2CSpecifications* Sensor Technology Optimum Measuring Range Signal Output¹ Response Time T90Accuracy² Drift2 Linearity Repeatability Temperature Coefficient Operating TemperatureStorage Temperature Recommended Flow Rate Humidity Non-Condensing Expected Life³Recommended Storage Warranty4PCB Connections SizeGalvanic Type Micro Fuel Cell 0 to 10 PPM 460 - 625 uA 7 seconds +/- 1% of signal< 2% +/- 1% +/- 0.5% -2.2% / °C 5 to 45°C 0 to 45°C 0.5 - 5 SCFH 0 - 99% RH24 months 6 months 12 months Center Negative, Outer Positive 1.25x1.25Note: AST Model SRX-MTL-2C is packaged in a metalized bag filled with nitrogen. Use immediately after removing from sealed bag.This sensor is recommended for inert and gaseous hydrocarbons gas streams. For gas streams containing CO2, use AST ModelSZX-MTL-2C1. Signal Output measured in air at 25°C and at atmospheric pressure.2. At constant temperature and pressure.3. At operating temperature less than 30°C, at atmospheric pressure, and oxygen content under 10,000 PPM4. AST warrants the sensor for 12 months to be free from defects in materials and workmanship. AST will not be held liable forsensor damaged due to customer neglect or misuse.* Specifications are validated during design and are subject to change without notice.(909) 517 0037 [email protected] www.appliedsensing.com13905 Ramona Ave. Ste E Chino, CA 91710 USA