Senseca RWI-016PVK Level Switch

Level SwitchDimensionsLevel Switch RWIInstallation from inside, hole diameter Ø16.5● Installation from inside or outside ● Highly reproducible ● Normally open or normally closed contactInstallation from outside, hole diameter Ø23Characteristics Mechanical level monitor for fluid media, with contact-free triggeringof a reed contact.Technical data Switch Process connection Density of medium Pressure resistanceMedium temperature Ambient temperature Media Wiringreed switch male thread M16x1.5Handling and operation 3PP PVDF PP PVDF PP PVDF -20..+70 °C● It must be ensured that the values given for voltage, current, and power are not exceeded.● When switched on, a load must be connected in series.● The electrical details apply to ohmic loads.Capacitive, inductive and lamp loads must be operated using a protective circuit.● Not suitable for use in media with ferritic particles.0.60 g/cm 0.75 g/cm3PN 3 barPN 6 bar -20..+90 °C -20..+130 °COrdering code water, oils 'normally open' or 'normally closed' No. 0.4481.RWI - 0162.3.4.P=Optionbrown Switching voltage Switching current Switching capacity Protection classIngress protection Electrical connection Materials medium-contact WeightInstallation locationbluebrownbluemax. 250 V AC max. 0.5 A max. 50 VA 2 - safety insulationIP 65 (optinal IP 00) cable 0.5 m1. Connection size 016 threaded connection M16x1.52. Process connection P compression fitting3. Connection material P PP V PVDF4. Electronic connection K cable F Faston plugOptions ● Silicone seal ● Transformer 175 V AC, 0.25 A, 3 VA ● Brass connection G 3/4 APP model:PVDF model:PP, FKM PVDF, FKM 0.075 kg horizontal installationdsh_fam_rwi-p_en_vs01 V1.02-001